Quality Inspection Types & Requirements

A Xometry job may require one of the following inspection types, as requested by the customer: 

1. Standard Measurement Protocol (template)
2. First Article Inspection Report (FAIR) (template)
3. CMM Report

The information on it is shown on the Job Offer description 

as well as in My Orders - Order Details (pay attention to the information about the parts)

Standard Inspection

Standard Inspection Report:

Provide your own or complete our template

The following dimensions/measurements are required:

• Overall length, width and height of part
• All hole locations/diameters/depths
• Thread size/depths
• Threaded holes at right angles to the surface
• Pocket/step depths (at least 1 depth per face)
• Corner radii correct to model
• Each face should have at least 1 feature checked for X and Y location from zero edge
• Surface Roughness

First Article Inspection Report (FAIR)

FAIR Inspection Report: provide your own or complete our template

Formal/CMM Inspection

Formal Inspection Report:

Provide your own

How to upload? 

To upload the protocols, use the special form in My Orders

Click Add Protocol and upload it